Most investors who put money into an oil and gas fund don’t know which type of interest they’re holding. It’s rarely explained in plain terms before capital is committed.
The main difference between a working interest and a royalty interest is cost responsibility. A working interest gives an investor a share of production revenue but also requires them to pay their share of drilling, completion, and operating costs. A royalty interest provides a share of production revenue without responsibility for those operating costs.
Both give you exposure to production, but they carry fundamentally different cost structures, risk profiles, and tax treatment. When oil prices fall or a well underperforms, each type of interest responds differently. How you get paid, what you’re responsible for, and how the IRS classifies your income all depend on which one sits inside the fund you’re evaluating.
Understanding which one you’re holding is an important due diligence question in oil and gas investing, and it’s one investors don’t often ask.
| Working interest | Royalty interest | |
| Cost burden | Responsible for proportional share of drilling, completion, and operating costs | No cost obligation; revenue share is gross of operating expenses |
| Revenue share | Share of production revenue after operating costs are deducted | Share of production revenue before operating costs are deducted |
| Liability exposure | Exposed to environmental liability and operational risk | Generally insulated from operational liability |
| Tax treatment | Intangible drilling costs (IDCs) often immediately deductible; depletion allowance applies | Depletion allowance applies; not subject to self-employment tax; may be subject to 3.8% NIIT |
| Upside potential | Higher when production costs are controlled and commodity prices are strong | Capped relative to working interest; no leverage from cost efficiency |
| Downside exposure | Significant; cost overruns and low prices compress or eliminate returns | Limited; revenue share continues as long as production continues |
| Capital calls | Possible, particularly during drilling or workover operations | None |
| Typical investor | Operators, private equity, accredited investors comfortable with operational risk | Income-focused investors seeking passive commodity exposure |
| Access through funds | Oil and gas partnerships, private equity energy funds | Royalty funds, mineral rights acquisition funds |
| How payments are calculated | Percentage of production revenue after applicable costs | Percentage of production revenue without drilling and operating costs |
What Is a Working Interest?
A working interest is an ownership stake in an oil and gas lease that grants the right to explore, drill, and produce from a defined area, along with the obligation to pay a proportional share of all associated costs. If you hold a 10% working interest in a well, you receive 10% of the revenue after operating costs and are responsible for 10% of every dollar spent drilling, completing, and operating it.
That cost obligation is one of the biggest distinctions. The upside is real when production is strong and commodity prices are favorable. So is the downside when they aren’t. A working interest holder who commits capital to drill a well that comes in below expectations has already spent the drilling and completion costs. And those costs don’t come back.
Working interests are typically held by operators, private equity energy funds, and accredited investors who understand the operational risk they’re taking on. The tax treatment can be attractive. Intangible drilling costs, which cover labor, chemicals, and other non-salvageable expenses associated with drilling, are often immediately deductible in the year they’re incurred rather than capitalized and depreciated over time. That front-loaded deduction is one of the primary reasons sophisticated investors have historically been drawn to working interest investments despite the operational complexity.
Capital calls are a real feature of working interest ownership. If a well requires a workover, additional drilling, or remediation, working interest owners contribute their proportional share of those costs. Investors who don’t account for potential capital calls when sizing a position can find themselves writing checks they didn’t plan for, at times that don’t align with their liquidity.
What Is a Royalty Interest?
A royalty interest is the right to receive a share of production revenue from an oil and gas well without any obligation to pay drilling, completion, or operating costs. A royalty owner gets paid off the top, before expenses are deducted, and contributes nothing to the cost of getting the oil or gas out of the ground.
This passive structure is what makes royalties attractive to income-focused investors. Production continues, the royalty check arrives, and the royalty owner has no involvement in or liability for how the well is operated. If operating costs spike or the operator makes a poor decision, the royalty owner’s revenue share is unaffected. The exposure is to commodity price and production volume, not to operational execution.
Three royalty types appear most often in fund structures:
- A mineral royalty is the most fundamental, retained by the mineral rights owner when a lease is signed and running for the life of production on that acreage.
- An overriding royalty interest, or ORRI, is carved out of the working interest and expires when the underlying lease expires.
- A net profits interest, or NPRI, pays a share of net profits rather than gross revenue, which introduces some cost exposure but typically less than a full working interest.
The depletion allowance applies to royalty income the same way it does to working interest income. Royalty owners can deduct a percentage of gross income each year to account for the gradual exhaustion of the resource, which reduces the effective tax rate on royalty distributions. For mineral royalties in particular, the percentage depletion deduction has historically made royalty income more tax-efficient than the ordinary income classification alone would suggest.
Royalty interests don’t offer the same upside leverage as working interests when conditions are favorable. The tradeoff is a more predictable income stream with no exposure to cost overruns, capital calls, or operational liability.
Working Interest vs. Royalty Interest: Cost, Risk, and Returns
The clearest way to see the difference between working interests and royalties is to run both through the same scenario.
Let’s say a well produces 1,000 barrels of oil per month and an investor has $100,000 to deploy. Royalties carry no exposure to operating costs, so buyers typically pay more for each share of revenue. In this example, $100,000 buys either a 1% royalty interest or a 2% working interest. The working interest holder pays 2% of operating costs but receives 1.6% of revenue, because a 20% royalty burden is paid to mineral owners before working interest owners receive their share. (These figures are illustrative. Actual pricing and royalty burdens vary by basin, well age, and remaining reserves.)
Scenario 1: Baseline ($80 oil, $25,000 monthly operating costs)
| Royalty (1%) | Working Interest (2%, 1.6% NRI) | |
| Revenue share | $800 | $1,280 |
| Share of operating costs | $0 | $500 |
| Monthly net income | $800 | $780 |
Under normal conditions, the two positions produce nearly identical income. The working interest holder receives a larger slice of revenue, and that advantage is offset by their share of operating costs.
Scenario 2: Strong prices, efficient operations ($90 oil, $15,000 monthly operating costs)
| Royalty (1%) | Working Interest (2%, 1.6% NRI) | |
| Revenue share | $900 | $1,440 |
| Share of operating costs | $0 | $300 |
| Monthly net income | $900 | $1,140 |
When an operator keeps costs low in a strong price environment, the working interest pulls ahead by about 27%. Higher prices lift both positions, but only the working interest holder benefits from the lower cost base.
Scenario 3: Rising operating costs ($80 oil, $60,000 monthly operating costs)
| Royalty (1%) | Working Interest (2%, 1.6% NRI) | |
| Revenue share | $800 | $1,280 |
| Share of operating costs | $0 | $1,200 |
| Monthly net income | $800 | $80 |
Operating costs can climb as a well ages, needs workover or intervention, or faces new regulatory compliance requirements. The royalty owner’s income is unchanged, while the working interest holder’s income falls by roughly 90%.
Scenario 4: Falling commodity prices ($45 oil, $25,000 monthly operating costs)
| Royalty (1%) | Working Interest (2%, 1.6% NRI) | |
| Revenue share | $450 | $720 |
| Share of operating costs | $0 | $500 |
| Monthly net income | $450 | $220 |
A price decline reduces income for both positions, but the working interest holder absorbs a much steeper drop because operating costs stay fixed while revenue shrinks. If prices fall far enough that revenue no longer covers operating costs, the operator may shut in the well temporarily. At that point the royalty owner receives nothing, and the working interest holder may still owe a share of ongoing costs such as maintenance and lease obligations.
What the Scenarios Show
Working interests carry operational leverage in both directions. When prices are strong and operators run efficiently, that leverage produces higher income than a royalty position of equal cost. When costs rise or prices fall, the same leverage compresses income quickly and can turn it negative. Royalties give up that upside in exchange for insulation from operating costs and more predictable income across market conditions.
These comparisons are pre-tax. As covered in the tax section below, the after-tax picture can shift meaningfully for working interest holders.
Working Interest vs. Royalty Interest Tax Treatment
Working interests and royalties share one major tax benefit, the depletion allowance. They differ in whether the investor can deduct drilling costs, how losses can be used against other income, and which additional taxes apply.
The Depletion Allowance
Oil and gas reserves shrink as they’re produced, and the tax code lets owners of both interest types account for that through a depletion deduction. Owners can calculate cost depletion, based on what they paid for the interest, or percentage depletion, and take whichever is greater for each property. Under Section 613A of the Internal Revenue Code, independent producers and royalty owners can deduct 15% of the gross income from a property. Percentage depletion isn’t tied to the investor’s cost basis, so the deduction can continue for as long as the well produces, even after the total deducted exceeds the original investment.
The deduction has limits. It applies only to the first 1,000 barrels of average daily oil production (or the natural gas equivalent), it can’t exceed the net income from the property, and total percentage depletion can’t exceed 65% of the taxpayer’s taxable income for the year. Most individual investors are well below the production cap, so the net income and taxable income limits are the ones more likely to apply. Large integrated oil companies aren’t eligible for percentage depletion at all.
Intangible Drilling Costs
Working interest owners have access to a deduction royalty owners don’t: intangible drilling costs (IDCs). Royalty owners don’t pay drilling costs, so they have nothing to deduct. IDCs are the costs of drilling and preparing a well that have no salvage value, such as labor, fuel, drilling fluids, and site preparation (26 CFR § 1.612-4). They typically make up 60 to 80% of total drilling costs. Independent producers and individual investors can elect to deduct 100% of IDCs in the year they’re incurred, while integrated oil companies are limited to 70%. Tangible equipment such as casing and wellheads is depreciated separately.
For example, an investor with a 5% working interest in a $1 million well with $700,000 in IDCs could deduct their $35,000 share in the first year. How much that deduction is worth depends on whether the investor can use it against other income, which is covered in the next section. Two other factors are worth raising with a tax advisor: IDCs can be a preference item for the alternative minimum tax, and previously deducted IDCs and depletion can be recaptured as ordinary income when the interest is sold.
How Losses and Income Are Classified
The passive activity rules generally allow losses from passive activities to offset only passive income. Working interests have a special exception. According to IRS Publication 925, a working interest held directly or through an entity that doesn’t limit the investor’s liability isn’t treated as a passive activity, regardless of whether the investor participates in operations. That allows the early losses created by IDC deductions to offset wages, business income, and other nonpassive income.
The exception depends on how the interest is held. A limited partnership interest, or an LLC membership that limits the investor’s liability, generally doesn’t qualify, and losses from those structures are treated as passive. Many drilling programs address this by issuing general partner units that convert to limited partner units after the drilling year, once the IDC deductions have been taken. Investors should know that if they use a working interest loss against nonpassive income, future net income from that property is also treated as nonpassive.
Royalty income falls into a separate category. Royalties that aren’t earned in the ordinary course of a trade or business are generally treated as portfolio income, the same category as interest and dividends. Royalty income is therefore not subject to the passive loss limits, and it also can’t be used to absorb passive losses from other investments.
Self-Employment Tax and the Net Investment Income Tax
According to the IRS, income from a working interest held directly is reported on Schedule C and is subject to self-employment tax, while royalty income is reported on Schedule E and generally isn’t. Investors who hold a working interest as limited partners are generally exempt from self-employment tax on their share of partnership income.
Royalty income does count as net investment income, so higher earners may owe the 3.8% Net Investment Income Tax on it. Income subject to self-employment tax is generally excluded from that surtax. For high-income investors whose earnings already exceed the Social Security wage base, the self-employment tax owed on additional income is limited to the Medicare portion, so the difference between the two treatments can be smaller than it first appears.
Tax Reporting
Investors who own royalty interests directly typically receive a Form 1099-MISC. Investors in an oil and gas fund receive a Schedule K-1 regardless of interest type, and K-1s often arrive later in the tax season than other forms, which can require filing an extension.
Because these rules depend on how the interest is held, the investor’s income level, and their other investments, the tax impact of either interest type is worth modeling with a CPA before committing capital.
What This Means for Investors Evaluating Oil and Gas Funds
Most oil and gas funds hold one type of interest predominantly. A royalty fund focused on mineral rights acquisition generates passive income with no capital call risk and limited operational exposure. A working interest fund targeting development drilling offers higher upside potential, front-loaded tax deductions, and significantly more operational risk.
Some funds hold both. Aspen Funds’ oil and gas strategy, for example, focuses on acquiring non-operating working interests and overriding royalty interests across multiple operators and basins. The overriding royalties produce revenue that isn’t reduced by operating costs. The working interests give Aspen the right to participate in new drilling on the same acreage, which creates development upside and IDC deductions on newly drilled wells. Because the interests are non-operated, Aspen partners with established operators and doesn’t run wells itself. This blended approach is designed to balance the cost insulation of royalties with the upside of working interests.
The first question to ask any oil and gas fund manager is how the portfolio is split between interest types and why. A manager should be able to explain that allocation clearly, including how it affects cash flow, cost exposure, and the tax benefits investors can expect.
A few more questions worth asking before committing capital.
- What percentage of the portfolio is working interest versus royalty? A fund marketed as an income vehicle that holds primarily working interests carries more risk than the income framing suggests.
- Are capital calls possible, and under what circumstances? Working interest funds almost always carry capital call risk. Know what triggers a capital call and how much additional capital you might be asked to contribute.
- How does the fund handle a well that becomes uneconomical to operate? Working interest holders face real decisions when operating costs approach gross revenue. Understanding the manager’s process for shutting in or divesting marginal wells reveals how disciplined they are about protecting remaining capital.
- What is the fund’s commodity price assumption for underwriting new positions? A fund underwriting wells at $85 oil in a $70 market is taking on more risk than the projected returns reflect.
The interest type inside the fund determines your cost exposure, tax treatment, liability profile, and downside risk. It’s worth understanding before you sign the subscription documents.
Know What You’re Holding
Working interests and royalties are so often grouped under the oil and gas label that investors sometimes don’t realize they’re evaluating fundamentally different things. Their cost structures, risk profiles, tax treatments, and the types of investors they suit differ.
Royalties offer passive income, cost insulation, and a simpler tax profile. Working interests offer higher upside potential, front-loaded deductions, and meaningful operational risk. Neither is better in the abstract. The right one depends on what you’re trying to accomplish and how much complexity you’re willing to manage to get there.
Before committing capital to any oil and gas fund, find out which interest type the fund holds, in what proportion, and why. That single question will tell you more about the investment’s risk and return profile than most of what appears in the pitch deck.
Frequently Asked Questions
What is the difference between a working interest and a royalty interest?
A working interest gives the owner a share of oil and gas production revenue along with responsibility for a proportional share of drilling, completion, and operating costs. A royalty interest provides a share of production revenue without responsibility for those costs. As a result, working interests generally offer greater upside and greater operational risk, while royalties provide more passive exposure to production.
What is a net profits interest in oil and gas?
A net profits interest (NPI) entitles the holder to a share of the net profits from production rather than gross revenue. It’s typically carved out of a working interest, and net profits are calculated by deducting operating costs, production taxes, and sometimes capital expenditures from gross revenue, as defined in the agreement. An NPI holder has less cost exposure than a working interest owner because they don’t pay costs out of pocket, but more than a royalty owner because distributions flow only when the property generates a profit. Many NPI agreements also carry forward losses from unprofitable periods, so the holder may receive nothing until those prior costs are recovered, even after the well returns to profitability.
What is an overriding royalty interest?
An overriding royalty interest, or ORRI, is a royalty carved out of the working interest rather than retained by the mineral owner. Like a standard royalty, it pays a percentage of production revenue without any share of drilling or operating costs, though payments are typically reduced by production taxes and, depending on the assignment terms, certain post-production costs. The key difference is duration. An ORRI exists only as long as the underlying lease is in force, and when the lease expires or terminates, the ORRI ends with it. A mineral owner’s position is more durable, because they keep ownership of the minerals after a lease expires and can negotiate a new royalty when the acreage is leased again. ORRIs are commonly used to compensate geologists, landmen, and other deal participants who helped acquire or develop a prospect.
Can I lose money on a royalty interest?
The purchase price can exceed the value of future production if commodity prices fall sharply or the well depletes faster than expected. A royalty owner can’t lose more than their initial investment because there are no ongoing cost obligations, but overpaying for a royalty interest in a declining field at peak commodity prices is a real risk. Royalty valuation depends heavily on reserve estimates, decline curves, and commodity price assumptions, all of which carry meaningful uncertainty. The passive income structure protects against operational losses, not against paying too much upfront.
Are working interests or royalties better for passive investors?
It depends on whether the investor’s priority is predictable income or tax benefits and upside. Royalties fit a passive income goal most directly, with no share of operating costs, no capital calls, and no operational liability.
Most investors who hold working interests, including through funds, hold non-operating working interests and have no role in drilling or day-to-day operations. Their exposure is financial. A non-operating working interest owner still pays a proportional share of costs, may face capital calls, and sees income move more sharply with operating costs and commodity prices. Investors who want working interest tax deductions and upside along with steadier royalty income may want to consider funds that hold both interest types.
How are oil and gas royalties valued?
Royalty valuation starts with estimated future production, using a decline curve to project how output falls over the life of the well or field. That production is multiplied by a commodity price assumption, net of production taxes and any post-production deductions, to estimate future revenue. The revenue stream is then discounted to present value at a rate that reflects the investment’s risk. The industry’s common benchmark is PV-10, which discounts future cash flows at 10% per year using SEC pricing rules based on a 12-month historical average. PV-10 makes reserves easier to compare, but actual transaction prices often differ because buyers apply their own price outlook and discount rates, particularly for undeveloped reserves. Royalty values are highly sensitive to both commodity price and decline rate assumptions.
What is the intangible drilling cost deduction?
Intangible drilling costs (IDCs) are the costs of drilling and preparing a well that have no salvage value, such as labor, fuel, drilling fluids, and site preparation. They typically make up 60 to 80% of total drilling costs. Independent producers and individual working interest owners can elect to deduct 100% of IDCs in the year they’re incurred instead of recovering them over the life of the well. Royalty owners don’t pay drilling costs, so the deduction isn’t available to them.
Whether an investor can use the deduction against wages or business income depends on how the interest is held. A working interest held directly, or through an entity that doesn’t limit the investor’s liability, is exempt from the passive activity rules. A limited partnership interest generally doesn’t qualify, so losses from it can only offset passive income. IDCs can also trigger the alternative minimum tax and may be recaptured as ordinary income when the interest is sold, so the after-tax benefit is worth modeling with a tax advisor.




